Stock Item Disassembly: Difference between revisions

Revision as of 02:25, 5 February 2016

Menu: Production | Stock Item Disassembly...

Introduction

Stock Item Disassembly is an entry form to record the actual components (materials) to be received after convert or disassemble from the final product.

Components (materials) will be added into the stock balance. However, the final products will be deduct out from the stock balance. You can always check the stock movement from the stock card report.

Stock Item Disassembly (DS) Entry

1. CLICK on New button.

2. Select the Disassembly Code to disassembly.

3. Enter the quantity. BOM components quantity based on the BOM master in Maintain Stock Item.

4. CLICK on Save button.

@@ Line 2: / Line 2: @@
 ==Introduction==
-Stock Item Disassembly is an entry form to record the actual components (materials) to be received from the conversion of the final product based on the actual input.
+Stock Item Disassembly is an entry form to record the actual components (materials) to be received after convert or disassemble from the final product.
-Actual components (materials) used will be deduct out from the stock balance. However, the final products will be replenish the stock balance. You can always check the stock movement from the stock card report.
+Components (materials) will be added into the stock balance. However, the final products will be deduct out from the stock balance. You can always check the stock movement from the stock card report.
 <br />
-==Create New Stock Item Disassembly (DS)==
+==Stock Item Disassembly (DS) Entry==
-CLICK on NEW button to create new Stock Item Disassembly.
+:1. CLICK on '''New''' button.
+::[[File: PD-DS-01.jpg | 60PX]]<br />
-::[[File: PD-Stk Disassembly-New Form.jpg | 440PX]]
+:2. Select the '''Disassembly Code''' to disassembly.
+::[[File: PD-DS-02.jpg | 600PX]]<br />
-<br />
+:3. Enter the '''quantity'''. BOM components quantity based on the BOM master in '''Maintain Stock Item'''.
+::[[File: PD-DS-03.jpg | 600PX]]<br />
-==SAVE Stock Item Assembly==
+:4. CLICK on '''Save''' button.
-. CLICK on SAVE button.
+::[[File: PD-DS-04.jpg | 600PX]]
-::[[File: PD-Stk Disassembly-Save.jpg | 440PX]]
-<br />
-==Batch Update Unit Cost==
-Allow users to run Update Unit Cost for ALL or Stock Item Assembly selected.
-. At Stock Item Assembly browse, RIGHT click on area between the detail and close button.
-. You will see the small menu. See screenshot below.
-::[[File: PD-Stk Disassembly-Batch Update Unit Cost.jpg | 440PX]]
-<br />
-. Click on Batch Update Unit Cost. You will see the screenshot as below.
-. You can highlight more than one Stock Assembly documents. RIGHT click and "Tick Selection".
-::[[File: PD-Stk Assembly-Batch Update Unit Cost-Selection.jpg | 440PX]]
-<br />
-. After that, press UPDATE button to start.
-::[[File: PD-Stk Disassembly-Batch Update Unit Cost-Update.jpg | 440PX]]
 <br />
-. Once completed, it will prompt the below message. Press OK to exit.
-::[[File: PD-Stk Disassembly-Batch Update Unit Cost-Successful.jpg | 440PX]]
-<br />
 ==See also==
-* [https://sites.google.com/site/sqlestream/sql-financial-accounting/8-production 8. Production]