Display Pole - VFD-800-U in Windows 10

From eStream Software
Revision as of 06:14, 1 February 2016 by Twfaung (talk | contribs) (→‎Solution)

Introduction

If you had upgrade you windows to Windows 10 & using this Display Pole - VFD-800-U(might happen on other model), you might had problem in communicate with SQL Accounting.
The problem is because the build in or Original driver provided is incompatible with windows 10.

Tools & Driver Required

  • USBDeView - To check USB Status & Com Port Number
  • Driver

Problem

USBView-01.jpg
  • When you run the USBDeview.exe you will see the above problem

Solution

01. Right Click This PC | Properties
02. Click Device Manager
USBView-02.jpg
03. Right Click at the Com had problem
USBView-03.jpg
04. Select Delete the driver for software for this device
05. Click OK
06. Install New/Update driver (May refer to the Display Pole Provider)
07. Click Action | Scan for hardware changes
08. Done & will look like below screen
USBView-04.jpg
In USBDeView
USBView-05.jpg
In Device Manager

See also