| Line 18: | Line 18: | ||
:04. Select Delete the driver for software for this device | :04. Select Delete the driver for software for this device | ||
:05. Click OK | :05. Click OK | ||
:06. Install | :06. Install [http://www.estream.com.my/downloadfile/Fairy/DiplayPole-VFD800U-PL-2303-Vista-Driver-Installer.exe New/Update] driver (May refer to the Display Pole Provider) | ||
:07. Click '''Action | Scan for hardware changes''' | :07. Click '''Action | Scan for hardware changes''' | ||
:08. Done & will look like below screen | :08. Done & will look like below screen | ||
Revision as of 04:59, 13 January 2016
Introduction
If you had upgrade you windows to Windows 10 & using this Display Pole - VFD-800-U(might happen on other model), you might had problem in communicate with SQL Accounting.
The problem is because the build in or Original driver provided is incompatible with windows 10.
Tools Required
- USBDeView - To check USB Status & Com Port Number
Problem
- When you run the USBDeview.exe you will see the above problem
Solution
- 01. Right Click This PC | Properties
- 02. Click Device Manager
- 03. Right Click at the Com had problem
- 04. Select Delete the driver for software for this device
- 05. Click OK
- 06. Install New/Update driver (May refer to the Display Pole Provider)
- 07. Click Action | Scan for hardware changes
- 08. Done & will look like below screen
- In USBDeView
- In Device Manager
See also
- Others Customisation